Tools and Sundries

Back to: Installing / mounting a Parrot Interactive LED on a Stand

As a Technical installation Team or Technician you have a whole arsenal of tools at hand. But do you have the correct tools to mount an LED on a stand?

The Parrot Interactive LED range does carry a bit of weight that it can throw around and below are the actual LED weights that you could use to plan or formulate a solution to your Sales Representatives. This will also assist in Team Needs as Health and Safety is always the highest priority.

Net Weight / Gross Weight

65″ – 43KG / 57KG

75″ – 57KG / 77KG

86″ – 72KG / 96KG

**The IW7101 stand has a maximum carry weight of 136.4Kg

Stand weight specifications and manual.

The stand as stated above can carry the following weight:

Maximum carry weight – 136.4Kg
AV shelf max load – 13.6Kg
Video tray max load – 4.5Kg

The Assembly and Specification sheet below:

IW7101 – Interactive Touch Panel Stand Part 1

IW7101 – Interactive Touch Panel Stand Part 2

As you can note from the above, firstly and most importantly, always have an assistant to assist with carrying the actual stock and installation as it will be very difficult trying to lift and mount these screens as a “One man band”.

Tools:

There aren’t many tools required to install the IW7101 stand. Most of the tools and fasteners are included in the packaging, this will be indicated below:

M6 Hex Wrench / Allen key
1. This should be included in the packaging
With this figure you will see the included bolts and fasteners
Phillips screw driver set
Measuring tape
Shifting spanner and/or Spanner set
Have a spare Allen Key set

Sundries:

In all cases the Stand kit does have bolts accompanying it and the LED itself has the necessary screws to mount the back brackets. But we always recommend you keep the following sundries with you so that you may increase productivity and time efficiency when installing.

Insolation tape – preferably the Nitto tape as it has more flexibility to it.
Cable ties – To assist with the neatness of the cables
Plug tops – In the event that something happens with the Plug of the LED.